FOSROC NITOCOTE CM210 CEMENTITIOUS COAT 18KG POWDER AND 5KG LIQUID
RM135.00
ELASTOMERIC CEMENTITIOUS WATERPROOF COATING
Specification
1) Estimation Coverage Application : 10.8 – 11m² per 23KG.
2) Recommendation : A minimum coverage of 3.8 kg/m2 applied in not less than 2 coats.
3) The waterproofing coating shall be Nitocote CM210, an elastomeric cementitious coating. The cured coating, after immersion, shall be capable of withstanding cracked substrate cyclic movement from 0 – 300 – 0 microns at 15°C for 6,000 cycles without failure. It shall have the capability to resist a positive water pressure of 5 bar and a negative water pressure of 3 bar when tested to European standard CEN/TC 67-67072:2003 part A-7.
Contact Us For Best Deals
-
Description
Product Description
Product Features
• Nitocote CM210 provides a cementitious, elastomeric waterproof coating with inherent crack-bridging ability. Typical applications include – Swimming pools.
• Nitocote CM210 two-component polymer modified cementitious coating is supplied in pre-packaged form. The product is designed to be easily mixed on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using either brush, trowel or spray. Roller application may also be used, however finishing the surface with a trowel is recommended for best results. Nitocote CM210, available in grey and white, cures to form an elastomeric impermeable membrane.
• Withstands high positive and negative hydrostatic pressures. Excellent crack accommodation before and after immersion.
• Approved for use in contact with potable water. Excellent bond to concrete and masonry.
• Long working life. Easy application by brush, trowel or spray. Bonds to green or damp concrete.
