Product Features
• Nitocote CM210 provides a cementitious, elastomeric waterproof coating with inherent crack-bridging ability. Typical applications include – Swimming pools.
• Nitocote CM210 two-component polymer modified cementitious coating is supplied in pre-packaged form. The product is designed to be easily mixed on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using either brush, trowel or spray. Roller application may also be used, however finishing the surface with a trowel is recommended for best results. Nitocote CM210, available in grey and white, cures to form an elastomeric impermeable membrane.
• Withstands high positive and negative hydrostatic pressures. Excellent crack accommodation before and after immersion.
• Approved for use in contact with potable water. Excellent bond to concrete and masonry.
• Long working life. Easy application by brush, trowel or spray. Bonds to green or damp concrete.
FOSROC NITOCOTE CM210 CEMENTITIOUS COAT 18KG POWDER AND 5KG LIQUID
RM135.00
ELASTOMERIC CEMENTITIOUS WATERPROOF COATING
Specification
1) Estimation Coverage Application : 10.8 – 11m² per 23KG.
2) Recommendation : A minimum coverage of 3.8 kg/m2 applied in not less than 2 coats.
3) The waterproofing coating shall be Nitocote CM210, an elastomeric cementitious coating. The cured coating, after immersion, shall be capable of withstanding cracked substrate cyclic movement from 0 – 300 – 0 microns at 15°C for 6,000 cycles without failure. It shall have the capability to resist a positive water pressure of 5 bar and a negative water pressure of 3 bar when tested to European standard CEN/TC 67-67072:2003 part A-7.
150 in stock
11
People watching this product now!
Fast Shipping
200+ Products
Genuine, Durable
